Sometimes already sawn logs are too thick in the diameter. Such issue makes it impossible to locate it in a fire chamber or the furnace (for which, actually, logs are intended). If to split them, then even a big logs will go. Moreover, it will dry quicker. However, it may be difficult if you will take wrong approach. So, to make it correctly you need to learn several rules, which shall help you. Learn how to chop logs of strong breeds of wood correctly here, in this article.
To split solid wood, use a sled hammer, wedges for splitting, or log splitter. The sled hammer is, in fact, thicker wedge-shaped axe for a splitting of firewood with a blunt end on another side of an edge. A heavy sled hammer, which usually heavier than the axe is more convenient for the chop of logs. Of course you may take the lighter one. But in this case you would waste time.
Wedges for a splitting are generally metal wedges, which you drive in into a log with a side part of the tool. The advantage of wedges is that they can be inserted along a log and to drive in so far until a wedge would not split a log. On the other side, such wedges need to be hold carefully when splitting. Otherwise, it may lead to unnecessary injures.
The axe can cut firewood but do not split logs. If you want to split solid wood, it is better to take a sledgehammer and wedges for a splitting.
History of log splitters begun in the USA. This device has proved as the reliable and effective machine for a splitting of firewood. This device has managed to gain trust among those consumers who have given him the preference.
Log splitters are used for both industrial and personal splitting of logs. This device has both advantages and disadvantages.
Besides simplification of pains in a waist, this device will help you to quickly split logs. Saving of time can be considerable. Manufacturers state that it is up to 5 times. Even this one fact is a good reason for the purchase of a splitter. To find more about this device see this page.
Try to cut logs on all length. The 16 to 20 inches (40-50 cm) lengths are suitable for the ordinary furnace on firewood and a small fireplace. The shorter logs are easier to split. Logs have to be such sizes that it was convenient to pick, store and, actually, to use them for designated purpose.
Try to cut so that edges of a log remained equal. You will need to put them on a cut to split and if a cut will be curved, it will be more difficult to make it.